Nuova Simonelli Talento Service Manual page 132

13.1 ALARM THAT BLOCK MACHINE FUNCTION
DISPLAY
DRAWER
FULL
DRAWER
Out
FRONT PANEL
OPEN
BEAN
HOPPER OUT
GROUP
ERROR
TOO MUCH
COFFEE
13.2
SERVICE MANUAL
CAUSA EFFECT
Grounds Keys delivering
drawer full. coffee based drinks
The number of are blocked.
coffee grounds
in the drawer
has reached
the number
set during
programming
stage.
Grounds drawer Keys delivering
out of place. coffee based drinks
are blocked.
Front panel The machine
open. functions are
blocked.
One of the The machine
coffee bean functions are
containers is blocked.
out.
During the The machine
group handling functions are
phase, the blocked.
group exceeded
maximum set
time by 10
seconds before
reaching the
position.
After grinding Coffee will not be
the group delivered and an
can not close ejection cycle will
the brewing be effected.
chamber with
the upper piston.
SOLUTION
Pull out the grounds
drawer and empty it
into a garbage bag.
Put the drawer back
into place, when the
display reads:
DRAWER
OUT
Insert the grounds
drawer into its
special slot or check
the magnet and the
magnetic reader and its
connection.
The coffee cycle will
recommence only when
the drawer has been
put back in its place.
Close the front Panel
or check the door
microswitch and its
connection.
Insert the bean hopper in
its special slot or check
the magnetic reader
and its connection.
Enter in the TEST
mode (see par.12.2)
and check the position
of the brewing
chamber respect
the microswitches,
controlling if the
movement is free and if
all three microswitches
are closed by passing
the magnet chamber.
- Check if the upper
piston enters free in
the brewing chamber
when it goes up.
- Reduce the quantity
of grinded coffee
reducing grinding
time.
Edition 02 to 12/2013
SEE
PAR.
10.4
10.4
6.1
16.2
8.2
16.2
3.10
3.10
11.1.3