Nuova Simonelli Talento Service Manual page 113

3 COUNT CYCLE (Group cycle counter)
Press ENTER to enter the sub menu; all of
the beverage keys (1-10) will start to flash. Press
the beverage key to read the number of bever-
ages poured: e.g. for left and right grinder
COUNT CYCLE
BUTTON 2
R: 000020
L: 000030
The cycles refer to single beverages; press 2X
to read the number of cycles for double
beverages.
Press and hold down ENTER
onds to reset the counter.
Press RESET to quit the counter for the
selected beverage; press RESET
for 3 seconds to quit the sub menu.
4 TOT CYCLES (Total group cycles)
Press ENTER to enter the sub menu; the
keys remain lit and the display will read:
TOT CYCLES
N. 0002563
The number of cycles is the sum of all beverages,
single and double.
Press and hold down ENTER
onds to read the absolute total (not resettable to
zero):
TOT CYCLES
ABSOLUTE TOT
N. 0006500
Edition 02 to 12/2013
SERVICE MANUAL
Press and hold down ENTER
onds from the total absolute menu to reset the
partial TOTAL CYCLES counter.
Press RESET
5 TOT GRIND R (Right grinder total)
Press ENTER
keys remain lit and the display will read the total
time of the right grinder in hours and minutes:
for 6 sec-
Press and hold down ENTER
onds to read the absolute total (not resettable to
again
zero):
Press and hold down ENTER
onds from the total absolute menu to reset the
partial TOT GRIND R counter.
Press RESET
6 TOT GRIND L (Left grinder total)
for 10 sec-
Press ENTER
keys remain lit and the display will read:
for 6 sec-
to quit the submenu.
to enter the sub menu; the
TOT GRIND R
H : MIN
000000:63
for 10 sec-
TOTGRIND R
ABSOLUTE TOT
H : MIN
000000:63
for 6 sec-
to quit the submenu.
to enter the sub menu; the
TOT GRIND L
H : MIN
000000:63
11.5