Nuova Simonelli Talento Service Manual page 116

NOTE:
At this point press LEFT GRINDER to start
the test mode, the display shows "TESTING
PLEASE WAIT" flashing: the group makes a
setting cycle and then starts the beverage
with the parameter just set. After the test ,
the display come back automatically into the
programming mode and it's possible to modify
again the parameters and test again by press-
ing LEFT GRINDER until product satisfies
required quality features.
List of the functions that can be programmed for
the MILK COFFEE beverage:
MILK TIME (used to set the milk time/
amount).
NO AIR TIME (used to set the milk time/
amount without foam).
AUTOWASHING (used to set the washing
time at the end of pouring).
R.GRIND TIME (used to set the grinding
time for right grinder).
L.GRIND TIME (used to set the grinding
time for left grinder).
GRIND SEL (used to set the default grinder).
VOLUME CC (used to set the volume of
water in the coffee).
PRE-BREWING (used to set the pre-brew-
ing time).
TAMPING (used to enable/disable pressing).
TEMPERATURE
ONLY) (used to set the temperature of the
milk).
DELAY (TALENTO SPECIAL ONLY) (used
to set the delay time for the steam in milk
product).
List of the functions that can be programmed for
the COFFEE MILK beverage:
R.GRIND TIME (used to set the grinding
time for right grinder).
L.GRIND TIME (used to set the grinding
time for left grinder).
GRIND SEL (used to set the default grinder).
VOLUME CC (used to set the volume of
water in the coffee).
PRE-BREWING (used to set the pre-brew-
ing time).
TAMPING (used to enable/disable pressing).
MILK TIME (used to set the milk time/
amount).
NO AIR TIME (used to set the milk time/
amount without foam).
AUTOWASHING (used to set the washing
time at the end of pouring).
11.8
SERVICE MANUAL
(TALENTO SPECIAL
TEMPERATURE
ONLY) (used to set the temperature of the
milk).
DELAY (TALENTO SPECIAL ONLY) (used
to set the delay time for the steam in milk
product).
List of the functions that can be programmed for
the CAFFELATTE beverage:
R.GRIND TIME (used to set the grinding
time for right grinder).
L.GRIND TIME (used to set the grinding
time for left grinder).
GRIND SEL (used to set the default grinder).
VOLUME CC (used to set the volume of
water in the coffee).
PRE-BREWING (used to set the pre-brewing
time).
TAMPING (used to enable/disable pressing).
MILK TIME (used to set the milk time/
amount).
NO AIR TIME (used to set the milk time/
amount without foam).
AUTOWASHING (used to set the washing
time at the end of pouring).
TEMPERATURE (TALENTO SPECIAL ONLY)
(used to set the temperature of the milk).
DELAY (TALENTO SPECIAL ONLY) (used
to set the delay time for the steam in milk
product).
List of the functions that can be programmed for
the MACCHIATO beverage:
MILK TIME (used to set the milk time/
amount).
NO AIR TIME (used to set the milk time/
amount without foam).
AUTOWASHING (used to set the washing
time at the end of pouring).
PAUSA (used to set the pause between milk
and coffee cycle).
R.GRIND TIME (used to set the grinding
time for right grinder).
L.GRIND TIME (used to set the grinding
time for left grinder).
GRIND SEL (used to set the default grinder).
VOLUME CC (used to set the volume of
water in the coffee).
PRE-BREWING (used to set the pre-brew-
ing time).
TAMPING (used to enable/disable pressing)
TEMPERATURE (TALENTO SPECIAL ONLY)
(used to set the temperature of the milk).
DELAY (TALENTO SPECIAL ONLY) (used to
set the delay time for the steam in milk product).
(TALENTO SPECIAL
Edition 02 to 12/2013