Nuova Simonelli Talento Service Manual page 55

5 Unhook the power cord for the heating
element (steam or coffee).
6 Unhook the teflon water inlet pipes in the
bottom part of the boiler.
7 Open the right side panel, loosening the
two screws on the top panel with a phil-
lips screwdriver.
8 Remove the probe:
A Coffee boiler tank temperature probe
(yellow)
B Steam tank temperature probe (red)
Then, free the wires.
10 Using a 10mm wrench take out the two
screws (A) securing the coffee or the
screws (B) securing the steam boiler
tank, and then remove the boiler moving
it up and slide down.
Edition 02 to 12/2013
SERVICE MANUAL
Fig. 19
Fig. 20
Fig. 21
8
Fig. 22
6
5
B
A
A
B
A B
6
5
10
4.7