5
Insert the support and spring.
6
Fit the o-ring in the middle of the bottom
piston shaft together with the previously
assembled springs.
7
Press the key number 7 to lower the
chamber and release it when the piston
is about to enter the bottom support of
the spring.
Press the piston down with one hand to
make sure that the shaft is centred with
the support.
8
Press 7 again to move the group to the
bottom position and insert the bottom
o-ring.
3.16
SERVICE MANUAL
Fig. 48
Fig. 49
Fig. 50
7
Fig. 51
5
6
8
Edition 02 to 12/2013