Nuova Simonelli Talento Service Manual page 133

DISPLAY
ALARM BOILER
FILLING
HEATING
TIME
ALARM COFFEE
TEMP
ALARM
STEAM TEMP
ALARM
GROUP TEMP
CLEANING
Edition 02 to 12/2013
SERVICE MANUAL
CAUSA EFFECT
The heater The machine will
filling stage stop. (during first
has exceeded installation, when
the 2 minutes the boilers are
maximum time; empty, this alarm
the probe level will appear twice)
is uncovered.
The boiler and The machine
group heating functions are
stage has blocked.
exceeded the
20 minutes
maximum time.
The coffee boiler The machine
temperature functions are
probe is broken. blocked.
The steam boiler The machine
temperature functions are
probe is broken. blocked.
The group The machine
temperature functions are
probe is broken. blocked.
One of the set The machine
cleaning alarms functions are
programmed blocked.
has reached
the set value
with WASHING
BLOCK active.
SOLUTION
Switch OFF and ON
the machine. If the
alarm reappears after
the second time of
trying, pleas check
the automatic level
solenoid valve and
clean the level probe
in the steam boiler and
check its connection.
Switch on and off the
machine, and check
the LED lights in the
control board indicating
the heating process.
The led light indicate
which element is
continuously powered.
Check the thermo fuse
or heating element and
change if necessary.
Check the connection
of the coffee boiler
temperature probe or
change it.
Check the connection
of the steam boiler
temperature probe or
change it.
Check the connection of
the group temperature
probe or change it.
Operate the washing
cycle.
SEE
PAR.
4.2
5.3
16.2
6.4
4.4
3.4
4.2
16.2
4.2
16.2
3.4
16.2
14.5
11.4.7
11.4.8
11.4.9
11.4.10
13.3