Nuova Simonelli Talento Service Manual page 83

To change the grinder blades, the engineer
needs to:
1 If not done yet, close the two tabs and
remove the containers.
2 Empty the grinders by residual coffee beans:
if possible use a vacuum machine, otherwise
grind the remaining beans:
and down arrow keys for 8 seconds: the
display will read "TEST".
start the Right grinder, or key E to start
the left grinder.
powder from the group.
3 Remove the top panel (fig. 7).
4
phillips screw from top.
5 Slide the regulator from the top.
6
7 Clean the seating to remove any coffee
deposit.
8 Disassemble the grinders using a flathead
screwdriver.
Edition 02 to 12/2013
SERVICE MANUAL
Fig. 11
Fig. 12
Fig. 13
Fig. 14
8.5