Nuova Simonelli Talento Service Manual page 90

9.1.2 WASHING AND
AIR SOLENOIDS
To access to the washing and air solenoids, the
engineer needs to:
1 Switch off the machine.
2 Remove the grounds drawer.
3 Turn the key anticlockwise.
4 Open the front panel.
The guides for the milk and coffee pouring pipes
are inside the front door. The milk pipe ends in
the top part, at the milk adjustment valve (A).
To access the milk solenoid valve assembly, the
service engineer needs to:
1 Remove the two screws with a phillips head
screwdriver.
2 Remove the left side panel.
Then, the engineer needs to:
3 Disconnect the fastons with the pliers.
4 Remove the two screws in the top right of
the side panel.
9.4
SERVICE MANUAL
Fig. 7
Fig. 8
Fig. 9
1
Fig. 10
1
4
2
A
2
4
3
Edition 02 to 12/2013
3