Nuova Simonelli Talento Service Manual page 129

12.4 SOFTWARE UPDATE WITH
USB KEY
1 Copy in the USB memory stick, the two pro-
gram files to update the software release:
Fig. 10
TL09CPU.hex
TL09DSP.hex
2 Switch off the Talento machine (the display
shows OFF).
3 Remove the USB memory stick from the PC
and insert it in the Talento machine.
Fig. 11
4 Push for 5 seconds the button 5 and 10 (the
two last buttons, hot water and steam, as
standard settings), the display shows:
> DISPLAY
CPU
SET - >USB
USB - >SET
Edition 02 to 12/2013
SERVICE MANUAL
5
6
7
8
9
10 the display shows OFF, push for 5 seconds
11 The display shows OFF, wait 30 seconds and
<
With arrow up and down can you chose the
software to download, CPU or DISPLAY.
Press to start the download, after few
seconds the display starts to blink with blue
or green light (CPU or DISPLAY). Wait until
the blue light of the display become fixed.
The transfer is done correctly.
Remove the USB memory stick and wait
until the display shows OFF.
Insert again the USB stick into the Talento
machine.
Repeat the procedure described in point 5
to transfer the second software, DISPLAY or
CPU.
Remove the USB memory stick.
the firs and second buttons on the left
(ENTER and RESET
the display becomes red and shoes RESET
DATA.
switch on the Talento machine. Read and
verify if the new release is showed on the
display during the lamp test.
) until
12.5