Nuova Simonelli Talento Service Manual page 12

If the appliance breaks down or fails to
work properly, switch it off. Any inter-
vention is strictly forbidden. Contact
qualified experts only. Repairs should
only be made by the manufacturer or
authorized service centres. Only origi-
nal spare parts must be used.
Failure to observe the above, could
make the appliance unsafe.
For installation, the qualified electri-
cian must fit an omnipolar switch in
accordance with the safety regulations
in force and with 3 (0,12) or more mm
(in) between contacts.
To avoid dangerous overheating, make
sure the supply cord is fully uncoiled.
Do not obstruct the extraction and/or
dissipator grids, especially of the cup
warmer.
Fig. 9
The user must not replace the appli-
ance supply cord. If the cord is dam-
aged, switch off the appliance and have
a qualified technician change the cord.
If no longer using the appliance, we
recommend making it inoperative; after
removing the plug from the mains elec-
tricity, cut the power supply cable.
CAUTION
RISK OF POLLUTION
Do not dispose of the machine in
the environment: to dispose of the
machine, use an authorised centre, or
contact the manufacturer for relative
information.
1.6
SERVICE MANUAL
Fig. 10
Fig. 11
RISK OF BURNS OR SCALDING
To ensure that the machine is properly
ventilated, place it with the ventilation
side at a distance of 15 cm (5,9 in) from
walls or other objects.
Once a machine wash cycle has been
started, do not interrupt it, as detergent
residues may then be left inside the
delivery group.
CAUTION
RISK OF INTOXICATION
Use the steam nozzle with care and
never place hands below the jet of
steam. Do not touch the nozzle imme-
diately after use.
CAUTION
We remind you that before carrying out
any installation, maintenance, unload-
ing or adjustment operations, the quali-
fied operator must put on work gloves
and protective footwear.
Edition 02 to 12/2013