Viewing The Current Configuration - Cisco 7920 Administration Manual

Verifying or Entering Network Settings
Note

Viewing the Current Configuration

Step 1
Step 2
Step 3
Step 4
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
5-6
Chapter 5
The SRST Cisco CallManager always appears last in the list of servers, even if it
is active.
Related Topics
Viewing the Current Configuration, page 5-6
•
• Modifying DHCP Settings, page 5-7
Configuring Static Settings, page 5-9
•
Configuring TFTP Options, page 5-13
•
To view the current network settings for a Cisco Wireless IP Phone 7920, use the
following steps.
Procedure
Press the Menu softkey.
Choose Network Config > Current Config.
Press Select to view the list of network settings.
See Table 5-1 for descriptions and references for these settings.
To return to the Network Config screen, press the Back softkey.
Related Topics
Verifying or Entering Network Settings, page 5-4
•
Modifying DHCP Settings, page 5-7
•
• Configuring Static Settings, page 5-9
Configuring TFTP Options, page 5-13
•
Configuring Network Settings on the Cisco Wireless IP Phone 7920
OL-3930-02