Adding Users To Cisco Callmanager - Cisco 7920 Administration Manual

Adding Users to Cisco CallManager

Step 9
Step 10
Step 11
Adding Users to Cisco CallManager
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
7-6
Choose Menu > Phone Settings > Ring Tones > Download Ring Tone. The loud
ring tones (loudxxx.raw) should be available for download on the phone.
From the Download Ring Tone list, scroll to and select the desired loud ring tone.
A check mark appears by the active ring tone.
From the Cisco Wireless IP Phone 7920, choose Menu > Profiles to adjust the
ring volume.
Make sure the ring volume is tuned to the maximum setting. Alternatively,
Note
you can choose the "Outdoors" profile, which has the maximum volume
setting preset.
For additional information about setting the ring volume on the phone, refer to
Chapter 7, "Using and Changing Profiles," in the Cisco Wireless IP Phone 7920
Guide.
Related Topics
Configuring Telephony Features Using Cisco CallManager Administration,
•
page 7-2
Adding Users to Cisco CallManager, page 7-6
•
The Cisco CallManager User Options web pages allow each user to perform the
following actions:
• Set up speed dial
• Set up call forwarding numbers
Chapter 7 Configuring Features and Users
OL-3930-02