Switching The Leap Prompt Mode On And Off - Cisco 7920 Administration Manual

Entering or Verifying 802.11b Configuration Settings

Switching the LEAP Prompt Mode On and Off

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
6-14
Chapter 6 Configuring the Wireless Network Settings on the Cisco Wireless IP Phone 7920
When the LEAP Prompt Mode is turned on, the phone displays a message
requesting that you enter the LEAP username and password whenever you power
on the Cisco Wireless IP Phone 7920.
Procedure
Press the Menu softkey.
Choose Network Config > 802.11b Configuration
Scroll to LEAP and press Select.
The LEAP options display.
Scroll to Prompt Mode and press Select.
To turn off the prompt mode, scroll to Off.
To turn on the prompt mode, scroll to On.
To confirm the change, press Select.
A check mark appears next to the selected option.
Press Back to return to the LEAP options.
Related Topics
Accessing the Wireless Network Configuration Settings on the Phone,
•
page 6-2
Entering or Verifying Wireless Settings, page 6-4
•
Performing a Site Survey Verification, page 6-15
•
Requirements for an Optimal Wireless Voice Environment, page 6-18
•
OL-3930-02