Activating The Wireless Settings - Cisco 7920 Administration Manual

Chapter 6 Configuring the Wireless Network Settings on the Cisco Wireless IP Phone 7920
Step 5
Step 6
Step 7

Activating the Wireless Settings

Step 1
Step 2
Step 3
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Scroll to WEP Key Settings and press Select .
Choose one of these options:
None—Disables the WEP key function and a check mark appears.
•
• 40 Bits—Enter a 10-digit password
128 Bits—Enter a 26-digit password
•
When you have completed the entry, press Back.
A check mark appears next to the selected option.
Related Topics
• Activating the Wireless Settings
Setting Up the Service Set Identifier (SSID)
•
• Selecting the Authentication Type
After you have added entries or made changes to entries in the Wireless Settings
menu, you must activate them. Use the following steps to activate the settings.
Procedure
Press the Menu softkey.
Choose Network Config > 802.11b Configuration > Wireless Settings
Scroll to Activate and press Select.
The Service Set Identifier (SSID), authentication type, or Wired Equivalent
Privacy (WEP) keys are activated.
Entering or Verifying Wireless Settings
6-9