Selecting The Authentication Type - Cisco 7920 Administration Manual

Entering or Verifying Wireless Settings
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11

Selecting the Authentication Type

Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
6-6
Chapter 6 Configuring the Wireless Network Settings on the Cisco Wireless IP Phone 7920
If you chose "Specify, " press Edit and enter an SSID value.
Note An "SSID Required!"message appears if you leave the SSID field blank
when you selected "Specify."
Scroll to SSID 2, and press Select.
Choose Any, None, or Specify. If you choose "Specify", you must enter another
SSID value.
For information about entering values, see the
the Network Configuration Menu" section on page
Choose the entry for SSID 3 and SSID4 as done in
When you have completed the entries, press Save.
Press Back to return to the Wireless options.
Related Topics
Selecting the Authentication Type
•
• Setting Up the Wired Equivalent Privacy Keys
• Activating the Wireless Settings
The Cisco Wireless IP Phone 7920 supports three types of authentication:
Open—Provides access to all APs and authentication through the optional
•
use of WEP keys at the local access point
Shared Key—Provides shared-key authentication through the use of WEP
•
keys at the local access point
• LEAP—A proprietary protocol for use in 802.11 wireless LAN environments
that exchanges a password and username with a RADIUS server in the
network
"Guidelines for Editing Settings in
5-3.
Step 8.
OL-3930-02