How Users Access Voice Messages - Cisco 7920 Administration Manual

How Users Access Voice Messages

How Users Access Voice Messages
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
A-4
• A user ID and default password for accessing the application.
These settings correspond to the values you entered when you added the user
to Cisco CallManager (see the
on page 7-6).
• A description of a web-based, graphical user interface application and how to
access it with a web browser.
• An overview of tasks that users can accomplish by using the web page.
You can also refer users to Customizing Your Cisco IP Phone on the Web, which
is available at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp79
60/usopt.pdf
Related Topics
How Wireless IP Phones Operate, page A-1
•
How Users Get Copies of Cisco IP Phone Manuals, page A-2
•
• How Users Access Voice Messages, page A-4
Cisco CallManager provides the flexibility to integrate with many different voice
messaging systems, including the Cisco Unity voice messaging system. Because
you can integrate with many different systems, you must provide users with
detailed information about how to use your specific system.
You should provide this information to each user:
• How to access the voice messaging system account.
The initial password for accessing the voice messaging system.
•
Make sure that you have configured a default voice messaging system
password for all users.
How the phone indicates that messages are waiting.
•
Make sure that you have used Cisco CallManager to set up a message waiting
indicator (MWI) method.
Appendix A Providing Information to Users Via a Website
"Adding Users to Cisco CallManager" section
OL-3930-02