Available Settings For Phone Configurations - Cisco 7920 Administration Manual

Chapter 4 Using the Cisco 7920 Configuration Utility

Available Settings for Phone Configurations

Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Table 4-6 lists the available settings for phone configurations.
Table 4-6 Available Settings for Phone Configurations
Setting Parameter
RingToneIndex
RingToneName
RingToneFile
DispWelcomeMsg
NewFirmwareImage
Upgrade
NewFirmwareImage
Filename
CDP
CDPTransmitInterva
l
CDPTTL
Related Topic
• Using the Cisco 7920 Configuration Utility, page 4-15
How to Use the Cisco 7920 Configuration Utility
Setting Value
Integer Value (1–4)
Currently using: (index 1-3)
1: Chirp 1
2: Chirp 2
3: Current ring tone
User specify: (index 4)
4: User specify from ring list
Character string (maximum
length = 20)
Character string (maximum
length = 64)
Character string (maximum
length = 10)
Enable | Disable
Character string (maximum
length = 64)
Enable | Disable
Integer Value (0–65535)
Integer Value (0–255)
Comment
The index of the ring tone.
Chirp 1 and Chirp 2 are
the default ring tones.
The name of the ring tone.
The ring tone file (*.raw).
Display welcome
message.
Enable or disable
firmware upgrade.
Firmware filename and
path.
Enable or disable Cisco
Discovery Protocol.
CDP transmission interval
(seconds).
CDP time to live
(seconds).
4-31