Dc/Dc Converter And Charger - Keysight Technologies U3810A Getting Started Manual

DC/DC Converter and Charger

Parameter
DCDC Input
DCDC Output
MPPC Operating
Point range
Charger Input
Charger Output
Charger Output
Keysight U3810 Series Getting Started Guide
Minimum Maximum
2.4 25
2.4 16
2.7 25
Typical Units
Volts
3.7/5/11 Volts
Volts
Volts
3.3/4.2/9.8 Volts
2.5/100/250 mA
Condition
Fixed or high efficiency Burst mode
Selectable
Set with potentiometer R1904
One-shot mode
Selectable
For charging 2xNiMH/1xLiPo/1x NiMH
Selectable
Current should be < C (mA-hr.)/10
80