Keysight Technologies U3810A Getting Started Manual page 115

4 Run the following command to install the Network Mapper program. You will need this for Module
1 Lab 7.
sudo apt install nmap
debian@beaglebone:~$ sudo apt install nmap
Reading package lists... Done
Building dependency tree
Reading state information... Done
nmap is already the newest version (7.40-1).
0 upgraded, 0 newly installed, 0 to remove and 202 not upgraded.
It is possible to upgrade the packages and operating system to the latest available revision.
However, this can cause unexpected behavior of the system. New packages may not have the same
functionality as the older packages. If a particular package needs to be upgraded, use the
command sudo apt upgrade <package>. For example:
debian@beaglebone:~$ sudo apt upgrade nmap
[sudo] password for debian:
Reading package lists... Done
Building dependency tree
Reading state information... Done
nmap is already the newest version (7.40-1).
5
For a full upgrade of all packages, sudo apt upgrade , with no package specified. This
download may require a significant amount of time and can require extra space. Look carefully at
the upgrade messages before starting the process.
debian@beaglebone:~$ sudo apt upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
started
27 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 262 MB of archives.
After this operation, 9,734 kB of additional disk space will be used.
Do you want to continue? [Y/n]
Keysight U3810 Series Getting Started Guide
bb-cape-overlays bb-customizations bone101 doc-beaglebone-getting-
e2fslibs e2fsprogs file git git-core git-man libarchive13 libcomerr2
libcpupower1 libexpat1 libexpat1-dev libmagic-mgc libmagic1 libsasl2-2
libsasl2-modules-db libss2 libssl1.0.2 libssl1.1 linux-cpupower
linux-libc-dev openssl sudo tzdata
115