Keysight Technologies U3810A Getting Started Manual page 123

13 Type make and it may take a few minutes to compile.
debian@beaglebone:~/mraa/build$ make
Scanning dependencies of target mraa
[
[
[
[
[
. . .
[ 97%] Built target mraa-i2c
Scanning dependencies of target mraa-uart
[ 98%] Building C object tools/CMakeFiles/mraa-uart.dir/mraa-uart.c.o
[100%] Linking C executable mraa-uart
[100%] Built target mraa-uart
debian@beaglebone:~/mraa/build$
Do not continue if there are errors in the make. Warnings are allowed.
WARNING
If there is an install from an apt install process, the older revision of the code will need to
be removed. To do this it is an apt remove of the mraa files done. Type in sudo apt
remove libmraa1 libmraa-dev mraa-tools
Keysight U3810 Series Getting Started Guide
1%] Building C object src/CMakeFiles/mraa.dir/mraa.c.o
2%] Building C object src/CMakeFiles/mraa.dir/gpio/gpio.c.o
3%] Building C object src/CMakeFiles/mraa.dir/gpio/gpio_chardev.c.o
4%] Building C object src/CMakeFiles/mraa.dir/i2c/i2c.c.o
5%] Building C object src/CMakeFiles/mraa.dir/pwm/pwm.c.o
123