Appendix E - Update, Upgrade, And Download Linux Packages - Keysight Technologies U3810A Getting Started Manual

Appendix E – Update, Upgrade, and Download Linux Packages
Your CPU will need to be connected to the internet via WLAN in order to perform the following
NOTE
downloads. Refer to
The Debian system can be used to add packages or update packages to a newer revision.
1
If you are continuing this lab from previous lab session;
2 Run the following commands to update the Debian Linux Package Caches in the BeagleBone.
cd ~
sudo apt update
debian@beaglebone:~$ sudo apt update
[sudo] password for debian:
Ign:1 http://deb.debian.org/debian stretch InRelease
Get:2 http://deb.debian.org/debian stretch-updates InRelease [91.0 kB]
Get:3 http://deb.debian.org/debian-security stretch/updates InRelease
[94.3 kB]
.
.
.
Get:12 http://repos.rcn-ee.com/debian stretch/main armhf Packages [1,037
kB]
Get:13 http://deb.debian.org/debian stretch/non-free armhf Packages [59.7
kB]
Fetched 8,863 kB in 41s (215 kB/s)
Reading package lists... Done
3 Run the following command to see if there is a package with "Network Mapper" words.
apt-cache search Network Mapper
debian@beaglebone:~$ sudo apt-cache search Network Mapper
ndiff - The Network Mapper - result compare utility
nmap - The Network Mapper
zenmap - The Network Mapper Front End
Keysight U3810 Series Getting Started Guide
Configure BeagleBone to connect to WLAN network
a Make sure your U3810A jumper settings are set up according to
System.
b Connect your PC to the BeagleBone with a USB cable. Refer to
(SSH) Communication.
c
Establish a secure shell communication with the BeagleBone. Refer to
connection.
for the instructions.
Set Up the U3810A
Set Up Secure Shell
Set Up SSH
114