Keysight Technologies U3810A Getting Started Manual page 39

5 Type the services command to view the available SSID's.
connmanctl> services
6 Select and copy the desired SSID key, type connect and paste the selected SSID key.
For example:
connect wifi_1234567890_managed_psk
Note on Windows select the key and right-click. On Linux and Mac, you may use middle-click.
Enter the SSID passkeys if needed. The result should say "Connected ...".
Agent RequestInput wifi_1234567890_managed_psk
Passphrase? w1f1p@55w0rd
Connected wifi_1234567890_managed_psk
You may connect to a different Access Point using this method.
The WLAN network id can be copy and pasted by using the mouse to highlight the section. On
NOTE
a Windows or PuTTY system, right-click the mouse to paste or the middle-mouse-click on a
Linux system.
It might take two to three minutes to connect to the WLAN network.
Keysight U3810 Series Getting Started Guide
MRR management service wifi_#######_managed_psk
dreamx
MRR Management 2
PLAZZADPNG
MRR Management
MulhafArchitect
GLOBAL@unifi
ScienceExplorer
HUAWEI-B618-1492
TMSSB2016
Myreka Office
pgtopteam
Passphrase = [ Type=psk, Requirement=mandatory, Alternates=[ WPS ] ]
WPS = [ Type=wpspin, Requirement=alternate ]
wifi_1234567890_managed_psk
wifi_########_managed_psk
wifi_########_managed_psk
wifi_########_managed_psk
wifi_########_managed_psk
wifi_########_managed_psk
wifi_########_managed_psk
wifi_########_managed_psk
wifi_########_managed_psk
wifi_########_managed_psk
wifi_########_managed_psk
39