Operating Modes; Manual Mode - Changing Temperature Setpoint - Salus RT510 Full User Manual

6. Operating modes

RT510 thermostat offers few operating modes:
- Manual mode - temperature setpoint is set by user manually and it's maintained until user change the setpoint again or switch to another mode.
- Schedule mode - thermostat works according to set schedule by user. It can be programmed in 5+2 (MON to FRI and weekend separately) mode or
daily (every day of the week separately) mode.
- Temporary override mode - thermostat temporary overwrite programmed schedule and maintain the temperature until next program change (you
can use it only during active schedule mode).
- Boost mode (hourly temperature override mode) - this option override the temperature setpoint for selected hours. It is available for manual and
schedule mode.
- Frost protection mode - thermostat maintain constant frost protection temperature until user exit this mode. Thermostat work on the lowest level
and takes as little energy as possible.
- Sleep mode - thermostat is basically switched off and takes no energy. You can turn it on by any button.
- Holiday mode - user can program day period to make thermostat maintain frost protection temperature. It is mostly when user go somewhere outside
for a long time eg. holidays and doesn't want thermostat to take bigger amount of energy.

6.1 Manual mode - changing temperature setpoint

In manual mode, the thermostat maintains a constant temperature set by the user. To set temperature setpoint follow steps below:
1
3
SELECT SET
SET
SELECT
To turn off the Manual Mode press
12
TEST / PAIRING
SELECT SET
Press button to activate the
Manual Mode.
SELECT
TEST / PAIRING
SELECT SET
Using or buttons set new
setpoint temperature.
TEST / PAIRING
TEST / PAIRING
button. Once the manual mode is off, the hand icon
2
Hand icon will appear on the main
TEST / PAIRING
SET
4
After new setpoint temperature set,
thermostat will return to the main
screen and will work in manual mode.
TEST / PAIRING
SELECT SET
TEST / PAIRING
SELECT SET
screen.
TEST / PAIRING
SELECT SET
on the thermostat will disappear.
SELECT SET
TEST / PAIRING