Device Configuration In Css; Css Initial Device Configuration; Figure 54: Css Login Banner; Setting The Br/Cm Pairing Number In Css - Motorola ASTRO 25 GTR 8000 Manual

MN003286A01-E
Chapter 4: GTR 8000 Base Radio Configuration

Figure 54: CSS Login Banner

4.4

Device Configuration in CSS

This section covers configuration of a device using the Configuration/Service Software (CSS).
NOTICE: The IP address for the device is available through a serial port connection in the
Tools → Set IP Address from the CSS menu.
4.4.1

CSS Initial Device Configuration

Process:
1 Perform the following configuration steps that require a serial connection. See
Through a Serial Port Link on page
a Set the IP address and paring number of the device. See
Pairing Number in CSS on page
b Set the serial security services. See
2 Perform the following configuration steps that require an Ethernet connection. See
Through an Ethernet Port Link on page
a Set the pairing number of the device. See
page 142.
b Set the current date and time. See
c Change the SNMPv3 configuration and user credentials on a selected device in the site. See
Changing SNMPv3 Configuration and User Credentials in CSS on page
d Create, update, or delete an SNMPv3 user. See
CSS on page 146.
e Verify the SNMPv3 credentials. See
on page 146.
f Configure Domain Name Services (DNS). See "Configuring DNS in CSS" in the
Authentication Services manual.
g Set the Software Download (SWDL) transfer mode. See
CSS on page 147.
134
135.
137.
Setting the Serial Security Services in CSS on page
140.
Setting the BR/CM Pairing Number in CSS on
Setting the Date and Time in CSS on page
Adding or Modifying an SNMPv3 User in
Performing an SNMPv3 Connection Verification in CSS
Setting the SWDL Transfer Mode in
Connecting
Setting the Device IP Address and
Connecting
143.
143.
138.