Table of Contents
Advertisement
Appendix A
Conventional GTR 8000 Base Radio
Option Kits
The required hardware and cables for the CA01958AA T2-2R Receiver Mute option kit are listed in this
section.
This appendix covers the option kits that are available for the conventional GTR 8000 Base Radio.
Each section provides the necessary information to order, install, and configure each option kit.
A.1
T2-2R, T3-3R, and T4-4R Receiver Mute Option Kits
The required hardware and cables for the CA01958AA T2-2R Receiver Mute option kit are listed in this
section.
These option kits add the capability of simplex operation, while expanding the receive capability over
two or more separate RF channels through a single antenna. The option kits allow a single GTR 8000
Base Radio to be interfaced with up to three GPW 8000 Receivers. The GTR 8000 Base Radio
provides both transmit and receive functionality. The GPW 8000 Receivers are used as additional
receive channels.
Four different Receiver Mute option kits are available:
•
T2-2R Receiver Mute Option CA01958AA (ADD: 2 GPW 8000 Receiver Hardware Kit - 4-Wire
Analog)
•
T3-3R Receiver Mute Option CA01959AA (ADD: 3 GPW 8000 Receiver Hardware Kit - 4-Wire
Analog)
•
T4-4R Receiver Mute Option CA01960AA (ADD: 4 GPW 8000 Receiver Hardware Kit - 4-Wire
Analog)
•
Tn-nR Receiver Mute Option CA01961AA (ADD: GPW 8000 Receiver Hardware No Splitter Kit - 4-
Wire Analog)
NOTICE: All Field Replaceable Unit (FRU), kit, and part numbers for all required components in
each kit are listed in the parts list section for each receiver mute kit.
A single standalone T7039A GTR 8000 Base Radio is required for each option kit. The option kit name
determines the number of GPW 8000 Receivers. For example, a T2-2R option kit requires one GTR
8000 Base Radio and one GPW 8000 Receiver. A T3-3R requires one base radio and two receivers,
and so on. The number defines the total number of G-series devices.
A.1.1
T2-2R Receiver Mute Option Kit
The required hardware and cables for the CA01958AA T2-2R Receiver Mute option kit are listed in this
section.
The CA01958AA T2-2R Receiver Mute option kit is used with a standalone GTR 8000 Base Radio and
one GPW 8000 Receiver. All option kit hardware and cables required are included in
Receiver Mute Option Kit Parts List on page
NOTICE: The illustrations show a GPW 8000 Receiver with one chassis and one transceiver. A
dual-slot chassis with two transceivers is available.
Conventional GTR 8000 Base Radio Option Kits
282.
MN003286A01-E
Table 78: T2-2R
281
Advertisement
Table of Contents
Troubleshooting
