Replacing A Preselector Filter; Figure 106: Preselector Filter (700/800 Mhz); Figure 107: Preselector Filter (Uhf) - Motorola ASTRO 25 GTR 8000 Manual

MN003286A01-E
Chapter 9: GTR 8000 Base Radio FRU Procedures
• The Status LEDs are green.
• The Alarm LEDs are off.
• The power supply Fan LED is off.
30 Place the base radio in Normal Mode, as follows:
a From the menu, select Service → Test and Measurement Screen.
b Click Change to Normal Mode.
c At the confirmation screen, click OK.
The base radio halts activity in the current mode and switches operation to the requested
mode.
31 Re-configure the Security Settings into the Backplane. See
in CSS on page 138.
32 Verify proper operation using software tools, including:
• Unified Event Manager (UEM)
• CSS
9.10

Replacing a Preselector Filter

Figure 106: Preselector Filter (700/800 MHz)

Figure 107: Preselector Filter (UHF)

250
Setting the Serial Security Services