Ethernet Connection Configurations; Setting The Br/Cm Pairing Number In Css; Figure 56: Snmpv3 Passphrase Prompt - Motorola ASTRO 25 GTR 8000 Manual

MN003286A01-E
Chapter 4: GTR 8000 Base Radio Configuration

Figure 56: SNMPv3 Passphrase Prompt

8 In the SNMPv3 Passphrase Prompt dialog box, enter the User Information and Passphrase
Information. Click OK. If Authentication Services are not enabled on a device, click OK when
the dialog box appears.
9 From the menu, select File → Read Configuration From Device.
The parameters download from the device to the service computer/laptop. When the download
is complete, the CSS main window opens. Use the map on the left side of the screen to view
configuration information for the device.
4.4.5

Ethernet Connection Configurations

The following procedures set configuration parameters in the Configuration/Service Software (CSS)
using an Ethernet connection.
4.4.5.1

Setting the BR/CM Pairing Number in CSS

When and where to use:
Set the pairing number for the base radio, receiver, and comparator using Configuration/Service
Software (CSS) when operating in a voting, multicast, or simulcast IP configuration using an Ethernet
connection.
Procedure:
1 Connect to the device using Configuration/Service Software (CSS) through an Ethernet port link.
See Connecting Through an Ethernet Port Link on page
2 From the menu, select Service → BR/CM Pairing Number.
142
140.