Motorola ASTRO 25 GTR 8000 Manual page 279

c From the Software Depot File Manager menu, select Component Operations → Import
Fileset.
d From the Import a Fileset Into the Software Depot dialog box, click Browse and search for
the swdlv3.cfg file, or follow path E:\swdl\swdlv1.cfg or swdlv3.cfg. Click Open.
NOTICE: Choose the swdlv1.cfg file if PSC 9600, QUANTAR
9600 devices are mixed with G-Series devices at a site.
The file appears in the Configuration File Path field of the Import a Fileset Into the
Software Depot dialog box.
e Click Generate. Click OK.
the Import a Fileset Into the Software Depot dialog box closes and the software
component appears in the Components In the Software Depot list of the Software Depot
File Manager window.
f Exit the Software Depot File Manager.
g From Software Download Manager, click Open Site Mode.
h Select the ASTRO 25 Site Type:Repeater, HPD, or Simulcast.
i Select the Zone, Site, and if applicable, the Subsite. The Subsite ID is only available when
the Site ID is between 1-64.
j Click Connect.
k If the device supports SNMPv3 protocol, a pop-up window appears with the security level
option. Choose the required security level. Click OK.
NOTICE: Depending on the size of the system, the window takes a few minutes to
update.
If the Ethernet connection to the site uses the Site Controller Service Port, you might
need to enter an 802.1x login account to connect to the SC Service Port. An 802.1x
account is a centrally managed account.
The system connects to the specified zone and site.
l If this is a simulcast site, from the Site View tab, click the icon in front of the Prime LAN
folder, and Subsite folders.
The entries under the Running Version column display the current version. The VLAN
column displays the VLANs for all devices.
m In the Operation Type, select Transfer and Install.
n In the Application Type:
• For an HPD site: select both HPD Site Controller and HPD Base Radio.
• For a repeater site: select both Repeater Site Controller and Site Repeater.
• For a trunked simulcast site: select Multisite Site Controller and Multisite Base Radio.
o In the Software Component drop-down list, select the version for each site device.
NOTICE: Both device software must be chosen as part of the site software download.
p In the Simultaneous Channels Install drop down list, select the number of the channels to
install simultaneously.
Software Download Manager always installs all channels. For example: setting the
Simultaneous Channels Install field to a specific number value means that those amounts
of channels are installed simultaneously.
Chapter 11: GTR 8000 Base Radio Disaster Recovery
MN003286A01-E
® , and ASTRO-TAC ®
279