Figure 89: Css Test And Measurement Screen - Motorola ASTRO 25 GTR 8000 Manual

Figure 89: CSS Test And Measurement Screen

3 If the base radio is not in service mode perform the follows substeps, otherwise go to
a Click Change to Service Mode.
b At the confirmation screen, click OK.
The base radio halts activity in the current mode and switches operation to the requested
mode.
c Re-open the Test And Measurement Screen as described in
4 Select Start Receiver Test.
A confirmation dialog box appears indicating the test progress. After a few seconds, the test
concludes with a pass or fail message.
5 Click OK.
6 If no further testing is needed, place the base radio in Normal Mode.
a Click Change to Normal Mode.
b At the confirmation screen, click OK.
The base radio halts activity in the current mode and switches operation to the requested
mode.
Chapter 5: GTR 8000 Base Radio Optimization
step 2.
MN003286A01-E
step 4.
207