Pin #
Signal
49
PL +
50**
Gen TX +
* For detailed information on the differences between the automatic Fallback In-Cabinet Repeat and
the externally-wired In-Cabinet Repeat functions, see the Conventional Operations manual.
** It is the responsibility of the third-party vendor to ensure that the signal generated by their device is
compliant with any regulatory agency limitation imposed on the channel. This signal is not filtered or
limited by the GTR 8000 Base Radio.
Figure 46: 50–Pin System Connector Pin-Outs (Trunked 3600)
3.4.8.3
Wireline Port Pin-Outs
The Wireline port, an RJ-45 connector, can accommodate up to eight pins.
Table 41: Wireline Port Pin-Outs
Signal Name
Line2_+
Line2_–
Line3_+
Line1_–
Line1_+
Line3_–
Line4_+
Line4_–
Type
Function
Input
n/a
Input
Gen TX DATA +
2-Wire Con-
Pin No.
nection
1
Input/Output
2
Input/Output
3
4
5
6
7
8
Chapter 3: GTR 8000 Base Radio Installation
Analog Signal – 600 Ohm Balanced
Analog Signal – 600 Ohm Balanced
4-Wire Con-
Wire Connec-
nection
Output
Output
Input
Input
MN003286A01-E
Note
Auxiliary 4-
tion
Input
Input
Output
Output
117