Advertisement
hP mONITOR
Recommend using "Auto Adjustment" for best possible picture:
Press the 4th button called "AUTO"
Highly recommend adjusting speaker volume:
1. Press MENU
2. Press RIGHT arrow button 4 times
3. Press MENU
4. Press RIGHT arrow button 3 times until Speaker Volume is highlighted
5. Press MENU
6. Press RIGHT arrow until volume level is at 100%
7.
Press AUTO to exit volume adjustment
8. Press AUTO to exit monitor settings
CheCK hOOd PROXImITY SwITCheS ANd LOweR LASeR BeAm
hooD proximity SwitCh
1. To enter service mode, first press "Tools"
2. Press the "More" button and then "Enter service mode".
3. Enter the standard service password when prompted and then press "Enter".
4. Press "Tools" from the balancer primary screen, press the "Advanced" button.
5. Select "Diagnostics".
Figure 74
42
Advertisement
