Advertisement
8. Remove the protective film from the Velco loop and hook strips and attach to the speakers and inside the
speaker shelf housing. Place the speakers.
9. Push the power button (power on) on the speakers and turn the volume up to MAXIMUM. Once installed,
speaker volume can be controlled from the balancer video player application. Refer to the balancer operation
manual, form 6422-T, for instructions.
10. Place the speaker shelf housing cover on the speaker shelf housing and secure with four 8-32 x .38 socket
button head cap screws, 75-397-2.
11. Install the monitor support cover, making sure none of the wires are pinched.
Figure 34
Figure 35
19
Advertisement
