Advertisement
17. Use tie straps to consolidate wires. The two power cables for the power supply and monitor should be routed
in the opening between the display support and power supply. Install the security keys into the 45-1337-1
board.
Position the security keys so that the metal clip is in full contact with the metal of the
security key.
18. Verify the jump drives are installed in the proper slot locations on the motherboard. Each drive has its own
designator; the File System Drive is represented with a red colored end, the Data Drive is represented with
a black tie string, and the Logging Drive is represented with a white tie string. If an optional printer is being
installed, plug the USB cable from the printer into the USB port as shown below.
Figure 22
Logging
Printer
Drive
Figure 23
13
Data
File System
Drive
Drive
Advertisement
