Setup Gui - Interfaces - Sdi I/O Interface - De-Embedder; Setup Gui - Interfaces - Sdi I/O Interface - Embedder - junger V*AP Manual

Set up GUI – INTERFACES – SDI I/O interface – De-Embedder
If the V*AP is equipped with an optional SDI interface the following settings will be available for it :
Set up GUI – INTERFACES – SDI I/O interface – Embedder
22
V*AP
This pane has three more
sub panes implemented
The De-Embedder has a
16 x 16 matrix to allow for
any combination of audio
signals to be presented to
the V*AP because inside
the V*AP, the signal
routing is oriented in
pairs. I.e. the label
"SDI 1/2" represents two
audio channels selected
by the matrix.
An additional
Dolby metadata stream
may be de-embedded
from the SDI.
For details see
SMPTE 2020-2 standard.