Keysight N774 C Series Programming Manual page 94

4 Measurement Operations & Settings
Parameters: DISabled:
AVGover:
MEASure:
Response: None
Example: :trig1:outp dis
Affects: All power meters
Command: :TRIGger:CONFiguration?
Syntax: :TRIGger:CONFiguration?
Description: Returns the hardware trigger configuration.
Parameters: None
Parameters: 0 or DISabled:
1 or DEFault:
2 or PASSthrough:
3 or LOOPback:
Example: :trig:conf?
Affects All power meters
Command: :TRIGger:CONFiguration
Syntax: :TRIGger:CONFiguration
Description: Sets the hardware trigger configuration with regard to Output and Input Trigger Connectors.
Parameters: 0 or DISabled:
1 or DEFault:
2 or PASSthrough:
3 or LOOPback:
Response: none
Example: :trig:conf dis
Affects All power meters
94
Never
When averaging time period finishes
When averaging time period begins
Trigger connectors are disabled.
The Input Trigger Connector is activated, the incoming trigger response for each slot.
A trigger at the Input Trigger Connector generates a trigger at the Output Trigger
Connector automatically. No triggers from the instrument at the output.
The same as PASSthrough. This is included for compatibility reasons.
->
DEF
Trigger connectors are disabled.
The Input Trigger Connector is activated, the incoming trigger response for each
slot.
A trigger at the Input Trigger Connector generates a trigger at the Output Trigger
Connector automatically. No triggers from the instrument at the output.
The same as PASSthrough. This is included for compatibility reasons.
Keysight N774xC Series Multiport Power Meter Programming Guide