Chapter 5
Installed Boom Sensors
FIGURE 10.
90' - 100' Booms
Outer Sensor
Inner Sensor
Mount the sensor bracket on the left boom using two 3-1/16" W x 4" L x 3/8" thread U-bolts (P/N 107-0171-
11.
608) and four 3/8"-16 zinc flanged lock nuts (P/N 312-1001-164).
Tighten the nuts to ensure the sensor is mounted securely.
12.
Repeat the steps above to mount the remaining boom sensor(s).
13.
Mount the Center Rack Sensor
Center Rack Sensor Mounting
FIGURE 11.
66
Dual Sensor Mounting Locations
Miller Nitro 2000 Series AutoBoom™ Installation Manual
120' Booms