Table of Contents
Advertisement
Chapter 5 mA-1302/mA-1305 Control and Operation
Configure Network Connections
Chassis Default Network Settings
Chassiss default Network Settings:
•
Network Mode: Static IP
•
Static IP Address: 10.105.8.32.
NOTE
When Chassis Network Settings are restored to factory default settings, any active
network connections are terminated and must be re-established using the factory
default settings.
Configuring Network Mode of Operation
This section provides instructions to configure the Chassis and instrument trays for DHCP
or Static network mode of operation.
Network Configuration Statement
All VIAVI modules in a CMP System must be configured to use the same network
mode of operation (DHCP or Static).
The IP address of each module in a CMP System must be within range of the other
modules in the system or the modules will not be able to communicate with each
other.
Page 5-10
mA-1302/mA-1305 AXIe Chassis Operation Manual
Rev. D0
April 2020
Advertisement
Table of Contents
