Table of Contents
Advertisement
External Host Controller
An External Host Controller can be a computer, laptop, or tablet that has the operating
specifications necessary to support the functions being performed by the CMP System.
External Host Controller Connection Options
The Chassis can be connected to an External Host Controller (External Host Controller)
using the Chassis PCIe Connector or via a LAN connection (wired or wireless). The type
of connection used depends on the type of External Host Controller used and the
connection speed required.
PCIe Connection
A PCIe Connection between the Chassis and External Host Controller is
recommended for tasks that require high speed data transfers between the Chassis
and External Host Controller. Establishing a PCIe Connection between the Chassis
and External Host Controller requires one of the following:
–
–
–
LAN Connection
A LAN Connection is sufficient to perform low speed data transfers and system
communication functions between the Chassis and External Host Controller. The
Chassis can be connected to a LAN using the Ethernet Connector or a WiFi
Connection.
Rev. D0
May 2020
External Host Controller with an operating system capable of PCIe slot
enumeration.
A computer fitted with a PCIe Adapter card and PCIe cable.
A Laptop fitted with a PCIe ExpressCard Adapter and PCIe Adapter Cable
mA-1302/mA-1305 AXIe Chassis Operation Manual
Chapter 3 mA-1302/mA-1305 Setup and Installation
Hardware requirements
Page 3-3
Advertisement
Table of Contents
