Table of Contents
Advertisement
System Trigger Connector (9)
The System Trigger In Connector provides the Chassis with an external trigger source to
trigger Chassis events.The System Trigger Out Connector allows the Chassis generated
signal to be used as a trigger source by another device.
The Chassis System Trigger Input/Output signals are routed and configured using one of
the Chassis Web Browser User Interface. See the following sections for information:
•
Configure Chassis Triggers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19
•
Triggers and Timing Configuration Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
WiFi ANT (10)
The WiFi Antenna is available to establish a wireless connection to the Chassis when a
LAN connection is not available. A WiFi Connection is sufficient to perform low speed data
transfers and system communication functions between the Chassis and Host Controller.
WiFi connectivity is controlled by the embedded webserver; WiFi activity can also be
controlled using an Embedded Host Module.
Rev. D0
May 2020
mA-1302/mA-1305 AXIe Chassis Operation Manual
Chapter 2 mA-1302/mA-1305 Controls and Connectors
Rear Panel Controls and Connectors
Page 2-7
Advertisement
Table of Contents
