Chapter 6 Care and Maintenance
Maintaining the Chassis
Maintaining the Chassis
The following procedures may be performed by the Operator. All other service must be
performed by Qualified Service Personnel.
CAUTION
This Device does not contain user serviceable parts. Servicing should only be performed
by Qualified Service Personnel.
Mise en Garde
Cet appareil ne contient pas de pièces pouvant être entretenues par l'utilisateur.
L'entretien doit seulement être effectué par du personnel de service qualifié.
Storing the Chassis
To prepare the Chassis for long-term storage:
1
Disconnect the Chassis from AC Power Supply.
NOTE
Wait until the Chassis fans stop running before disconnecting the Chassis from the AC
Power Supply.
2
Disconnect all accessory cords from the Chassis.
3
Refer to the
sheet for proper storage environment.
Visual Inspections
Visual inspections should be performed periodically depending on operating environment,
maintenance and use.
•
Ensure that AC Power Cord and supply connector are in good condition.
•
Examine the stability and condition of covers and handles.
•
Check the presence and condition of all warning labels and markings and supplied
safety information.
Page 6-2
Appendix A "Safety and Compliance Specifications"
mA-1302/mA-1305 AXIe Chassis Operation Manual
or the Chassis data
Rev. D0
April 2020