Table of Contents
Advertisement
Rack Mount Installation
CAUTION
The Chassis must be fitted with a Rack Mount Kit to properly install the Chassis in a test
equipment rack. Failure to use the approved rack mount accessories may result in
damage to the Chassis.
Mise en Garde
Le châssis doit être équipé d'une trousse de montage sur châssis pour installer
correctement le châssis dans un châssis d'équipement de test. La non utilisation des
accessoires de montage sur châssis approuvés peut entraîner des dommages au
châssis.
How to Install Chassis in Test Rack
1
Complete the Chassis Operation Verification Procedure.
2
Disconnect the Chassis from the AC Power Supply.
3
Install the Rack Mount Kit on the Chassis. Refer to the Rack Mount Kit Installation
Guide included with the Rack Mount Kit. The Rack Mount Kit Installation Guide is
included with the Rack Mount Kit.
4
Install the Chassis in the equipment rack per the Rack Mount Kit Installation Guide.
Rev. D0
May 2020
mA-1302/mA-1305 AXIe Chassis Operation Manual
Chapter 3 mA-1302/mA-1305 Setup and Installation
Chassis Work Environment
Page 3-7
Advertisement
Table of Contents
