Table of Contents
Advertisement
Chassis System Module (3)
The System Module is an integrated part of the Chassis. The System Module is not
accessible to the user. See
functionality.
Power On/Standby Button (4)
The On/Standby Button is located on the Chassis Front Panel. The On/Standby Button is
used to initiate the Chassis power on and off sequences. The Chassis should be powered
down using the On/Standby Button before the Chassis is disconnected from the AC Power
Supply. Refer to the section titled
information.
The On/Standby Button has an LED Status Indicator that changes color to indicate
operational status of the Chassis.
OFF
The Chassis is off and has been disconnected from an AC Power Supply; the
On/Standby Button LED is not illuminated.
ON Mode
The Chassis is powered on and ready for use; the On/Standby Button LED is a
constant green. The On/Standby Button LED flashes green during the power on
sequence.
Standby Mode
The Chassis is powered off, but is still connected to an AC power supply: the
On/Standby Button is amber. The On/Standby Button LED flashes amber during the
power down process.
Error Indicators
The On/Standby Button LED turns red when an error has occurred during the power on
sequence.
The On/Standby Button LED flashes red when the Chassis requires attention such as in
the event of a thermal shutdown.
Rev. D0
May 2020
"System Module" on page 1-3
"Powering the Chassis" on page 5-3
mA-1302/mA-1305 AXIe Chassis Operation Manual
Chapter 2 mA-1302/mA-1305 Controls and Connectors
Front Panel Controls and Connectors
for an overview of the module's
for additional
Page 2-3
Advertisement
Table of Contents
