Table of Contents
Advertisement
External Cleaning
The following procedure contains routine instructions for cleaning the exterior of the
Chassis.
•
Remove grease, fungus and ground-in dirt from surfaces with soft lint-free cloth
dampened (not soaked) with isopropyl alcohol.
•
Remove dust and dirt from connectors with soft-bristled brush.
•
When not in use, cover the connectors with suitable dust cover to prevent tarnishing
of connector contacts.
Software/Firmware Updates
The Chassis is shipped from the factory with the firmware and device drivers pre-loaded
on the Embedded System Module (ESM). Users should perform routine checks to
determine if a newer version of Chassis firmware and/or device drivers is available.
Contact VIAVI Customer Service to check for the latest version of software, firmware
and/or drivers.
Firmware/Software Distribution Methods
Firmware and software update distribution methods vary based on the export classification
of the software as well as customer requirements. System firmware and software updates
are distributed in the form of an ISO image.
•
The ISO image will be distributed to customer on a USB device or CD.
•
An email will be sent to the end user with a link to download the ISO image from a
secure file exchange server.
NOTE
The distributed ISO image will contain the latest version of software and firmware for the
CMP system.
Rev. D0
May 2020
- OR-
mA-1302/mA-1305 AXIe Chassis Operation Manual
Chapter 6 Care and Maintenance
Software/Firmware Updates
Page 6-3
Advertisement
Table of Contents
