Chapter 3 mA-1302/mA-1305 Setup and Installation
Chassis Operation Verification Procedure
Chassis Operation Verification Procedure
The following procedure is intended to verify basic Chassis operation. This procedure does
not verify the Chassis is operating within product specifications.
Operation Verification Procedure
1
Complete Chassis setup and installation.
2
Complete power on procedure.
3
Complete Chassis Self Test Procedure (refer to "Self Test Procedure").
Chassis Work Environment
The Chassis can be fitted for use on a work bench or in a rack environment. Refer to the
product
NOTE
For first time use, complete the Chassis Operation Verification Procedure before
installing the Chassis in it's work environment.
Bench Top Installation
When used as a free-standing unit, the Chassis should be placed on a level work surface
and connected to a grounded AC Power Supply.
Page 3-6
"Electrical Specifications" on page A-3
mA-1302/mA-1305 AXIe Chassis Operation Manual
for operating environment conditions.
Rev. D0
April 2020