Operating Mode; Ƒ V/F Characteristic Control; Ƒ Vector Control - Lenze 9300 Series System Manual

6.8

Operating mode

Description
Selection of the correct
operating mode
EDSVF9383V EN 7.1−04/2012
The control mode of the controller can be selected via the operating mode.
You can select between the following modes:
ƒ V/f characteristic control
ƒ Vector control
The V/f characteristic control is the classic operating mode for standard
applications.
When using the vector control you will achieve improved drive features
compared to the V/f characteristic control due to:
ƒ Higher torque via the complete speed range
ƒ Higher speed accuracy and higher concentricity factor
ƒ Higher efficiency
l
Operating mode 6.8
6.8−1