5. daIly oPEratIon
(running envelopes with your printer)
5.1. Mounting/Connecting your Envelope Feeder
Step 1. Prepare the printer to work with the envelope feeder as described in the first section of this manual.
Step 2. Set the feeder and acceleration table for your envelopes and ensure consistent feeding away from the
printer as described in the previous section.
Step 3. carefully move the feeder into position near the manual feed
tray of your printer.
4
Step 5. With one hand, grasp one of the protruding tabs of
the acceleration table and lift it until the acceleration
table is as high as it will go.
Lift the acceleration table by
pulling up on this tab
6
3
Step 4. Move the paper guides on the printer's manual feed
tray to their outermost position.
Move these guides outward as far as
they will go
5
Step 6. While holding the acceleration table up, move the
feeder forward toward the printer. Guide the end
of the acceleration table into the manual feed tray
of the printer.
22