HMS Anybus Edge Reference Manual page 8

HMS Sequence Editor
The following buttons are only available when the diagram tab is selected:
The following buttons are only available when the I/O mapping tab is selected:
Anybus Edge Gateway Reference Guide
Opens a dialog where you can edit the program settings. See
Starts/stops the PLC. The PLC can only be started if a non-empty program (diagram and/or I/O
mappings) has been saved.
Starts/stops Live View, p. 24.
Shows/hides Processing Order. See
Opens a menu where you can select a unit type to be added to the diagram view.
See Diagram, p. 7.
Opens a menu where you can select inputs or outputs to be added to the diagram view. The
menu consists of several sub-menus for inputs/outputs, interfaces, devices and arrays. Note
that for arrays you can either insert an I/O array element by selecting the topmost entry from
the respective sub-menu or a plain I/O element representing just one value of the array by
selecting the corresponding index from the respective sub-menu. See
Opens a menu where you can select a portal variable to be added to the diagram view.
See Diagram, p. 7.
Adds a constant to the diagram view. See
Opens a dialog through which you can add a new I/O mapping. See
Opens a dialog through which you can edit a selected I/O mapping. See
Deletes the selected diagram element or I/O mapping respectively.
Discards the whole diagram or all I/O mappings respectively.
Opens the help system in a new window.
Login button
Program Settings, p.
Diagram, p. 7.
Diagram, p. 7.
6 (148)
22.
Diagram, p. 7.
I/O Mapping, p. 21.
I/O Mapping, p. 21.
SCM-1202-154 1.0 en-US