Export; Event Log Messages; Open-Source Software - HMS Anybus Edge Reference Manual

Settings
This form can be used to enable this interface. You can also specify whether variables can be
written through the interface. And you can download a variable list file that can be imported
into iniNet Solutions' SpiderControl SCADA Editor.
4.3

Export

Via this form you can export the configuration of your Edge gateway device. It will be packed
into an update package that can be applied to other Edge gateway devices. You can find
information on how to use the extracted update package on the Update help site.
Select which settings you want to export by checking the corresponding options and then click
the OK button. After the update package has been created, it will be provided for download.
4.3.1

Event Log Messages

The following section describes the messages that the update system may log to the Event Log.
Messages are prefixed with the text Update Exporter:.
• Preparing export...
The export of the Edge gateway device's configuration is now being prepared.
• Packing update package...
The configuration is now being packed into an update package.
• Update package has been successfully packed
The configuration has been successfully packed into an update package.
• Preparation failed. Message: <message>
The preparation of the configuration export failed. A detailed error description is appended
to the message.
• Packing failed. Message: <message>
Packing the configuration into an update package failed. A detailed error description is
appended to the message.
4.3.2

Open-source Software

The following open-source software has been used to implement the export functionality:
Anybus Edge Gateway Reference Guide
123 (148)
SCM-1202-154 1.0 en-US