HMS Anybus Edge Reference Manual page 41

Settings
• Modbus Client/Master
– Connected to TCP device at <IP address>:<port>.
– Read/wrote from/to TCP device at <IP address>:<port> (unit: <unit identifier>, function
code: <function code>, address: <address>, quantity: <quantity>)
– Read/wrote from/to RTU device <serial port>:<device address> (function
code: <function code>, address: <value address>, quantity: <quantity>)
– The interval is being maintained again.
– The interval has been violated.
– Could not connect to TCP device at <IP address>:<port>. (Error code <code>).
– Could not read/write from/to TCP device at <IP address>:<port> (unit: <unit idenfifier>,
function code: <function code>, address: <address>, quantity: <quantity>, result
code: <result code>, error code: <error code>, exception code: <exception code>)
– Read illegal floating point value from TCP device at <IP address>:<port> (unit: <unit
idenfifier>, function code: <function code>, address: <address>, quantity: <quantity>)
– Could not read/write from/to RTU device <serial port>:<device address> (function
code: <function code>, address: <value address>, quantity: <quantity>, result
code: <result code>, exception code: <exception code>)
– Read illegal floating point value from RTU device <serial port>:<device
address> (function code: <function code>, address: <value address>,
quantity: <quantity>)
– Portal communication error <error code>
• Modbus Server/Slave
– Portal communication error <error code>
• M-Bus
– Read values from device "<manufacturer> - <medium> - <serial number>".
– Read value "<description>" from device "<manufacturer> - <medium> - <serial
number>".
– The readout cycle is being maintained again.
– Could not re-initialise M-Bus library.
– Scanning for slaves failed
– Determining slaves' configuration failed
– The readout cycle has been violated.
– Could not read values from device "<manufacturer> - <medium> - <serial number>".
– Could not read value "<description>" from device "<manufacturer> - <medium> -
<serial number>".
– Read illegal floating point value "<description>" from device "<manufacturer> -
<medium> - <serial number>".
– Portal communication error <error code>
Anybus Edge Gateway Reference Guide
39 (148)
SCM-1202-154 1.0 en-US