Remote Update - HMS Anybus Edge Reference Manual

Update
After the update package has been completely uploaded to the SD card it will be programmed.
While the device is being programmed, the website may not be able to contact it. Thus
communication errors might be reported. This is normal as long as the error message does not
persist for any length of time. After the update has been programmed you will be forwarded to
the index page.
6.1.1

Remote update

Software updates may also be distributed via the portal. The HMS Hub firmware creates three
nodes on the portal via which you can trigger and monitor the remote update. The update
package will be downloaded from any HTTP server.
Anybus Edge Gateway Reference Guide
Note that your device will not work anymore if you reset it while the update is being
programmed.
128 (148)
SCM-1202-154 1.0 en-US